x86 Instruction Set Reference

PMOVMSKB

Move Byte Mask

Opcode Mnemonic Description
0F D7 /r PMOVMSKB r32, mm Move a byte mask of mm to r32.
66 0F D7 /r PMOVMSKB r32, xmm Move a byte mask of xmm to r32.
Description

Creates a mask made up of the most significant bit of each byte of the source operand (second operand) and stores the result in the low byte or word of the destination operand (first operand).

The source operand is an MMX technology register or an XMM register; the destination operand is a general-purpose register. When operating on 64-bit operands, the byte mask is 8 bits; when operating on 128-bit operands, the byte mask is 16-bits.

Operation
if(OperandSize == 64) {
	//PMOVMSKB instruction with 64-bit source operand:
	r32[0] = Source[7];
	r32[1] = Source[15];
	r32[2] = Source[23];
	r32[3] = Source[31];
	r32[4] = Source[39];
	r32[5] = Source[47];
	r32[6] = Source[55];
	r32[7] = Source[63];
	r32[8..31] = 0;
}
else {
	//PMOVMSKB instruction with 128-bit source operand:
	r32[0] = Source[7];
	r32[1] = Source[15];
	r32[2] = Source[23];
	r32[3] = Source[31];
	r32[4] = Source[39];
	r32[5] = Source[47];
	r32[6] = Source[55];
	r32[7] = Source[63];
	r32[8] = Source[71];
	r32[9] = Source[79];
	r32[10] = Source[87];
	r32[11] = Source[95];
	r32[12] = Source[103];
	r32[13] = Source[111];
	r32[14] = Source[119];
	r32[15] = Source[127];
	r32[16..31] = 0;
}
Flags affected

None.

Protected Mode Exceptions
#UDIf EM in CR0 is set. (128-bit operations only) If OSFXSR in CR4 is 0. (128-bit operations only) If CPUID feature flag SSE2 is 0.
#UDIf EM in CR0 is set. (128-bit operations only) If OSFXSR in CR4 is 0. (128-bit operations only) If CPUID feature flag SSE2 is 0.
#NMIf TS in CR0 is set.
Real-Address Mode Exceptions
Same exceptions as in Protected Mode
Virtual-8086 Mode Exceptions
Same exceptions as in Protected Mode
Numeric Exceptions
None.
Instruction Latency Throughput Execution Unit
CPUID0F3n/0F2n/069n0F3n/0F2n/069n0F2n
PMOVMSKB r32, mm7/7/12/2/1FP_MISC
PMOVMSKB r32, xmm7/7/-2/2/-FP_MISC